Announcement of Ministry of Housing and Urban-Rural Development of the People's Republic of China

目录

NOTICE

Announcement of Ministry of Housing and Urban-Rural Development of the People's Republic of China

Foreword

1　General Provisions

2　Terms and Symbols

2.1　Terms

2.2　Symbols

3　General Requirements

3.1　Inspection of Building Structure Classification

3.2　General Provisions of Inspection

3.3　Inspection Method and Sampling Scheme

3.4　Inspection Technique of Structure and Constructional Element

3.5　Inspection Conclusion and Evaluation

3.6　Evaluation of Building Structure

4　Concrete Structure

4.1　General Requirements

4.2　Quality and Performance of Raw Materials

4.3　Strength of Structural Member

4.4　Performance of Concrete

4.5　Defects and Damage of Structural Member

4.6　Inspection for Reinforcing Steel in Concrete

4.7　Precast Concrete Structure

4.8　Performance Evaluation of Concrete Structure

5　Masonry Structure

5.1　General Requirements

5.2　Masonry Units

5.3　Masonry Mortar

5.4　Mechanical Properties of Masonry

5.5　Quality of Construction and Detailing

5.6　Defects of Structural Member

5.7　Evaluation of Masonry Structure

6　Steel Structure

6.1　General Requirements

6.2　Mechanical Properties of Steel Structures

6.3　Connection

6.4　Joint

6.5　Dimension and Deviation

6.6　Damage and Deformation

6.7　Structure and Stability

6.8　Coating Protection

6.9　Practical Load and Dynamic Load Tests of Structural Performance

6.10　Evaluation of Existing Steel Structures

7　Concrete Filled Steel Tubular Structure and Steel-concrete Composite Structure

7.1　General Requirements

7.2　Inspection of Concrete Filled Steel Tubular Structures

7.3　Inspection of Steel-concrete Composite Structures

7.4　Evaluation of Concrete Filled Steel Tubular Structures and Steel-concrete Composite Structures

8　Timber Structure

8.1　General Requirements

8.2　Properties of Wood

8.3　Defects of Wood

8.4　Manufacture and Installation Error

8.5　Connection and Construction

8.6　Deformation and Protective Measures

8.7　Evaluation of Existing Timber Structures

9　Existing Light Enclosure Structure

9.1　General Requirements

9.2　Snow Load

9.3　Wind Load

Appendix A　Correction and Verification of Test Results of Indirect Test Method

A.1　Correction Rules

A.2　Method of Correction Coefficient

A.3　Method of Correction Value

A.4　Methods of Comprehensive Coefficients and Parameters

A.5　Verification Method

Appendix B　Structural Dynamic Characteristics Testing Methods and Requirements

B.1　General Requirements

B.2　Testing Requirements

B.3　Data Processing

Appendix C　Testing of Building Vibration

Appendix D　The Method of Surveying Structure and Member

Appendix E　Reliability Index and Variation Coefficient of Load-carrying Capacity of Member

E.1　General Requirements

E.2　Parameters of Action Effect

E.3　Variation Coefficient of Member Load-carrying Capacity

E.4　Reliability Index and Partial Factor of Load-carrying Capacity of Member

Appendix F　Static Load Test of Structure Performance

F.1　General Requirements

F.2　Testing Plan

F.3　Applicability Test

F.4　Load or Member Coefficient Test

F.5　Comprehensive Coefficient or Reliability Index Test

Appendix G　Testing and Deduction of Potential Hazards of Free Calcium Oxide

Appendix H　Test of Chlorine Ion Content in Concrete

Appendix J　Test Method of Surface Hardness of Steel Bar

Appendix K　Test Method of Frostbite of Structural Concrete

Appendix L　Test of Steel Bar Corrosion in Concrete

Appendix M　Rebound Test for Compressive Strength of Common Sintered Brick

Appendix N　Determination of Steel Strength by Leeb Hardness Test

N.1　Application Scope and Test Instruments

N.2　Test Technology

N.3　Hardness Calculation and Steel Strength Conversion

N.4　The Deduction of Steel Strength and Classification of Strength Grade

Appendix P　Nondestructive Detection Method of Steel Member in Steel-concrete Composite Structure

P.1　General Requirements

P.2　Instruments and Basic Operation Requirements

P.3　Detection of Steel Member and Their Shapes

P.4　Measurement of Dominant Dimensions of H-shaped Steel Member

P.5　Dominant Dimensions of Rectangular Steel Member

P.6　Detection of Circular Steel Member

Appendix Q　Test Method of Instantaneous Wind Dynamic Coefficient of Enclosure Structure

Q.1　General requirements

Q.2　Test Instruments

Q.3　Dynamic Coefficient Test

Explanation of Wording in This Standard

List of Quoted Standards